How To Install Tile Board For Bathrooms
If you are looking for the alternative for tiles, you might want to consider getting tile boards. Tile board for bathrooms is available in larger size which is 8-foot-by-4-foot panels. Home owners will be able to install tile board in your bathroom easily and quickly. These boards have similar appearance with tile. The companies have manufactured tile boards with moisture resistant design. The price of these tile boards is less than the real tiles material. If the boards have higher quality, it will resemble more to the real tiles. Even so, it will look less real with age. Not all tile boards can be applied for bathroom area. Some tile boards only can be used as dry interior surfaces. Make sure you check the supplier before purchasing any board. If you are planning to install tile board in your bathroom, you might want to follow some simple steps below.
Before installing tile board for bathrooms, you should prepare some items including tile board panels, spacers, cloth, sandpaper, level, pencil, tile board adhesive, notched trowel 3/16 inch, and caulk. The first step which you should do is stacking the tile board panels on the floor or against the wall in the bathroom. This is important to condition the boards for bathroom environment. You need to place the spacers between the panels. You can leave the boards there for 48 hours. By doing this, you will let the room air to circulate around the panels.
Next, you need to sand the wall surface to create the even surface for tile board for bathrooms. Remove the dust on the tile board panels’ back with a piece of clothing. If there is any dust left on the tile board panel, it will not create good bond between the panels and the walls. After completing those processes, you can hold the level on the location of the top of the tile board panels. Draw the horizontal line to guide you during the installation process. Follow the instructions which come along with the tile board for bathrooms and mix the tile board adhesive. You can spread the adhesive on the back of the tile board panel. Create the ridges on the adhesive by using 3/6-inch notched trowel to scrape the adhesive. Notched trowel is designed with indentations in its edges which make it good tool for proper adhesive application.
You need to press the tile board panel against the wall. Make sure you align it with the horizontal line which you draw in the step before. You should wait for 15 minutes before pressing the panel again to help it adhere well to the wall. In applying the adhesive to the back of another panel of tile board, you need to press it against the wall. Leave 1/8 inch between two panels. You have to repeat the action until you have applied all the tile board for bathrooms.
The next step in installing tile board for bathrooms is applying the silicone caulk in the 1/8 inch spaces between tile board panels. Do it when the adhesive is totally dry. This process is necessary to prevent the water from entering the spaces. Water can be harmful for the tile board and also the wall.